Fire Alarm Operation

Fire Detection

Fire LED (red).

Buzzer active.

Fire relay active.

Automatic Activation Sequence (if enabled)

Fire detected.

Activation delay begins.

Activation LED blinks.

Warning devices activate.

Aerosol discharge occurs after delay.

Manual Activation Procedure

Press and hold both activation buttons simultaneously for ≥ 3 seconds.

Activation delay begins.

Activation LED blinks.

Warning devices activate.

Aerosol discharge occurs after delay.

Hold/Cancel

Delay time can be hold if button is pressed.

Cancel activation by pressing button ≥ 20 seconds.

Ventilation Shutdown and Restart

Ventilation OFF during activation.

Restart ventilation manually when safe.

After a Fire Event

Restart ventilation.

Confirm fire extinguished.

Technician inspection required.

Sticker, user quick guide

The sticker, enclosed to the FS10 Main Unit, gives a quick introduction to the user of the FS10 Main Unit.

It is recommended to setup the sticker next to the FS10 Main Unit, making all able to use the FS10 Main Unit in an emergency situation.

Sticker: