Fire Alarm Operation

Fire Detection

• Fire LED (red).

• Buzzer active.

• Fire relay active.

Automatic Activation Sequence (if enabled)

• Fire detected.

• Activation delay begins.

• Activation LED blinks.

• Warning devices activate.

• Aerosol discharge occurs after delay.

Manual Activation Procedure

• Press and hold both activation buttons simultaneously for ≥ 3 seconds.

• Activation delay begins.

• Activation LED blinks.

• Warning devices activate.

• Aerosol discharge occurs after delay.

Hold/Cancel

• Delay time can be hold if button is pressed.

• Cancel activation by pressing button ≥ 20 seconds.

Ventilation Shutdown and Restart

• Ventilation OFF during activation.

• Restart ventilation manually when safe.

After a Fire Event

• Restart ventilation.

• Confirm fire extinguished.

• Technician inspection required.

Sticker, user quick guide

• The sticker, enclosed to the FS10 Main Unit, gives a quick introduction to the user of the FS10 Main Unit.

• It is recommended to setup the sticker next to the FS10 Main Unit, making all able to use the FS10 Main Unit in an emergency situation.

• Sticker: