Recently Updated Pages
Appendix
Appendix A FS10 Main Unit, Activating the aerosol generators Press both Activation buttons (1) ...
Document References
The FS10 system is supported by the following documents: Document Description FS10 Service...
Troubleshooting
Detecting faults Press Button Mute / Reset / Lamp test for > 3 seconds. This will flash one of t...
Operator Maintenance
Permitted Tasks Visual inspection. Indicator check. Alarm acknowledgement. Prohibited Tas...
Abnormal & Emergency Conditions
General Fault Behaviour Fault LED (yellow). Buzzer intermittent. Fault relay active. Common Fau...
Fire Alarm Operation
Fire Detection Fire LED (red). Buzzer active. Fire relay active. Automatic Activation Seq...
Normal Operation
Power-On Behaviour System OK LED must turn green. Fault LED must be off. No audible fault i...
Controls and Indicators
Front Panel Overview Indicators and buttons 1. Activation buttons For manual activation in case ...
System Overview
System Purpose The FS10 is a dedicated control and monitoring system for fixed aerosol fire suppr...
Safety Information
Safety Definitions WARNING – Hazard that may cause serious injury or death.CAUTION – Risk of equ...
Introduction
Purpose of the Manual This manual provides operational guidance for the FS10 system. It describes...