Normal Operation
Power-On Behaviour
System OK LED must turn green.
Fault LED must be off.
No audible fault indications.
Monitoring Mode
The FS10 continuously monitoring aerosols, power, switches, and internal circuits.
FS10 also monitoring external detectors, fire alarms and warning devices, if configured so.
Daily Check (Recommended)
Verify System OK (green).
No faults active.
No fire alarms active.
External switches in correct positions.
Manual vs Automatic Mode
Manual Mode
Activation must be triggered by operator or external activation switch.
Automatic Mode
Activation may occur when 1 and 2, or 1 or 2 detector zones trigger (depending on configuration).
Buzzer Patterns
Prohibited Operator Actions
Do not open enclosure.
Do not rewire.
Do not disconnect aerosols.
Do not change internal configuration.