Introduction
Purpose of the Manual
This manual provides operational guidance for the FS10 system. It describes normal operation, fire response, manual and automatic activation, fault indications, and operator-level maintenance procedures. Installation, service, cabling, and configuration are covered in the FS10 Service Manual.
Scope
This document covers:
-
Day-to-day operation.
-
System status indications.
-
Fire alarm handling.
-
Manual and automatic activation logic.
-
Fault interpretation.
-
Basic operator maintenance.
-
Operational limitations and safety information.
It does not cover:
-
Electrical installation.
-
Firmware configuration.
-
Commissioning and testing.
-
Internal servicing. (see FS10 Service Manual).
Intended Audience
This manual is intended for:
-
Vessel crew.
-
Bridge operators.
-
Personnel responsible for fire safety equipment.
It is not intended for technicians, installers, or service engineers.
Related Documentation
-
FS10 Service Manual.
-
FS10 Datasheet.
-
FS10 Firmware Update Guide.
-
Aerosol Generator Manufacturer Data.
-
ISO 9094:2022.
-
ISO 10240:2019.
System Compliance and Intended Use
The FS10 system is compliant with DS/ISO 9094:2022 and intended for use in non-IMO marine applications, including:
-
Engine rooms.
-
Technical compartments.
-
Machinery spaces.
-
Enclosed utility spaces.
Symbol and Icon Note
The FS10 uses standardized colors and symbols for indicators and operational states. LED indicator meanings are defined in 4.3 Indicator table.
Additional technical symbols, detailed wiring symbols, and service-level icons are defined in the FS10 Service Manual.
Onboard Use and Accessibility Note
This User Manual shall be kept readily accessible to crew members responsible for fire safety.
It is recommended that the manual is stored near the FS10 Main Unit or at an appropriate location on the bridge or in the technical documentation binder for the vessel.
The manual is intended for operational use only; installation and service must follow the FS10 Service Manual.